PRODUCT OVERVIEW
HEXAFOR® fluoropolymers can be used to create penetrating sealers for natural stone, porous tile, grout and masonry. They prevent staining without changing the natural appearance of the treated surface. They provide water and oil repellence, stain resistance, and easy clean-up properties. All of our C6 HEXAFOR® fluoropolymers are Perfluorooctanesulfonic acid (PFOS) and Perfluorooctanoic acid (PFOA) free.
PROPERTIES
- EXCELLENT WATER AND OIL REPELLENCE
- ANTI-STAIN PROPERTIES
- EASY TO CLEAN PROPERTIES
- DURABLE TREATMENT
- ANTI-GRAFFITI PROPERTIES
- UV RESISTANCE
- IN COMPLIANCE WITH THE LIMITS SET BY REACH IN TERMS OF PFOA STATEMENT
PROTETTIVI PER PIETRA
| Product | Chemical description | Description |
|---|---|---|
| HEXAFOR® 6173 | Water-based fluorinated polymer emulsion | HEXAFOR® 6173 Water fluoropolymer emulsion designed for application on porous surfaces as terracotta, grout and concrete. If properly formulated it could impart excellent water and oil repellence as well as dirt pick up resistance to these substrates. It could be used as an ingredient in a wide variety of industrially-applied formulations. |
| HEXAFOR® 6211 | (Meth)acrylic polymer in water | HEXAFOR® 6211 Excellent water and oil repellent for natural stone, especially for porous stone. If mixed with a cationic/non-ionic high gloss water based acrylic polymer it could impart a wet look effect to the treated stone. Low minimum film forming temperature (MFFT |
| HEXAFOR® 6232 | (Meth)acrylic polymer in water | HEXAFOR® 6232 Excellent water and oil repellent for natural stone, especially for porous stone. In some cases, it could provide a weak wet look effect. It can be formulated inside paints, varnishes and waxes to increase water and oil repellence. It can be added in wood protective formulations. |
| HEXAFOR® 6242 | (Meth)acrylic polymer in water | HEXAFOR® 6242 Excellent water and oil repellent for natural stone, especially for porous stone. If applied in more coats, it can give weak wet look effect. The dilution in different amount of water/isopropanol could increase the penetration of the product into the treated stone. |
| HEXAFOR® 6392 | (Meth)acrylic polymer silane in water | HEXAFOR® 6392 Excellent water and oil repellent with very good beading effect for natural stone, especially for porous stone like limestone and sandstone. To give a wet look effect to the treated stone, you should mix with a cationic/non-ionic high gloss water based acrylic polymer. The adhesion of the dried coating is increased by the presence of a silane monomers in the polymeric structure. |
| HEXAFOR® 6400 | Fluorinated phosphate ester | HEXAFOR® 6400 Excellent water and oil repellent with very good anti-stain effect for natural stone, especially for compact stone. Low odour. Compatible with anionic systems. Improves the UV resistance of the polymers used for coating applications. |
| HEXAFOR® 6600 | Fluorinated polymer | HEXAFOR® 6600 Excellent water and oil repellent with very good anti-stain effect for natural stone like limestone and sandstone. It is compatible with anionic systems. It improves the UV resistance of the polymers used for coating applications. The treated surfaces are easily cleanable. It does not change the original appearance of the stone. |
| HEXAFOR® 6280 | Pure methacrylic polymer in solvent | HEXAFOR® 6280 Excellent water and oil repellent for natural stone, especially for compact stone. |
| HEXAFOR® 6282 | Pure methacrylic polymer in solvent | HEXAFOR® 6282 Excellent water and oil repellent with a high Flash Point (>70°C) and low odour for natural stone, especially for compact stone. It decreases the evaporation rate of the applied formulation, increasing the penetration into the stone. |
| HEXAFOR® 6284 | Pure methacrylic polymer in solvent | HEXAFOR® 6284 Excellent water and oil repellent for natural stone, especially for compact stone. |
| HEXAFOR® AGR-60 | Water based anti-graffiti coating | HEXAFOR® AGR-60 Considered as a sacrificial anti-graffiti, it could protect masonry such as concrete, brickwork and limestone from spray paint and marker pen. Those are easily removed by using common removers or steam. Strongly resistant to UV light, it prevents yellowing and it will not crack or peel off from the treated surface. |
Richiedi Informazioni
Le nostre linee di prodotto
-
PROTETTIVI PER PELLE
Agenti protettivi che forniscono una barriera protettiva contro diversi agenti (acqua, olio e altri). -
AUSILIARI TESSILI
Prodotti di finitura che forniscono un duraturo trattamento di idro e oleo repellenza su diverse tipologie di tessuti. -
PROTETTIVI PER PIETRA
Polimeri che formano una barriera chimica su diverse superfici lapidee, in grado di proteggerle da diversi agenti macchianti. -
TENSIOATTIVI
Agenti livellanti e bagnanti utilizzati in diversi settori come pitture e vernici, inchiostri, cere, adesivi e detergenza. -
AGENTI CROSSLINKANTI
Composti aggiunti in diverse formulazioni (dalle vernici e inchiostri, agli ausiliari per il settore tessile) che aiutano a migliorare le prestazioni chimiche e meccaniche. -
MICROPOLVERI PTFE
Additivi in polvere utilizzati in polimeri, pitture, inchiostri e altre formulazioni, in grado di migliorare resistenza all’abrasione, usura, stabilità termica e lubrificazione. -
ADDITIVI REOLOGICI
Sostanze che modificano la reologia delle formulazioni a cui sono aggiunti, variandone densità, viscosità e scorrevolezza.
