Adhesives & Sealants

HEXAFOR® 601 Anti-blocking agent, oil repellence properties, dirty pick-up resistance, wetting and levelling agent.

HEXAFOR® 631 Reduces surface energy of water-based floor finishes, waxes and polishes, inks, adhesives and sealants. Low foam formation.

HEXAFOR® 632 Reduces surface tension at very low concentration, stable in acidic and alkaline medium. Used in anti-fogging formulations

HEXAFOR® 635 Reduces surface energy of water-based floor finishes, waxes and polishes.

HEXAFOR® 636 For baking enamels based on alkyd, acrylic or polyester resins. Very soluble in hydroxyl resins for 2K coating. Air-drying alkyd systems.

HEXAFOR® 641 Reduces surface energy at very low concentrations. In wood coatings, it helps the varnish to overcome surface contamination defects at very low concentration (0,02%).

HEXAFOR® 642 Solvent-free wetting and dispersing additive. Aqueous coating systems. Printing inks and liquid colour masterbatches. Stable aqueous effect of pigment dispersions.

HEXAFOR® 644-D Flow and levelling agent in paints, adhesives, caulks, architectural coatings and inks.

HEXAFOR® 672 Wetting and dispersing additive with low to moderate foam formation.

HEXAFOR® 675 Improves wetting, enhances levelling, reduces cratering. Compatible with most aqueous-based waxes and polishes.

HEXAFOR® 676 Cleaners for glass and hard surfaces. It is "ultimately biodegradable" as defined by annex III of the European Regulation 648/2004/EC on detergents.

HEXAFOR® 678 It is stable in acidic, basic, and in water with high hardness. Excellent wetting and levelling agent.

HEXAFOR® 678-W is a water-based, non-ionic fluorosurfactant that effectively reduces surface tension at very low concentrations, has high property in terms of dynamic surface tension, allowing the coating formulations to reach rapidly the low values of static surface tensions. It is stable in both acidic and basic conditions, making it perfect for paint and coatings.

HEXAFOR® 685 is a polymeric fluorinated additive for solvent-based systems. Reduces surface tension. Improves wetting and levelling. Reduces cratering, fish-eyes effect and orange-peel effect. At the right dosage it is used as foam stabilizer. Hexafor 685 has been designed to have the right chemical-physical characteristics allowing a foam stabilization and allowing the various agents to facilitate the production of small gas bubbles in emulsion explosive compositions.

HEXAFOR® 692 Provides both surface water and oil repellence and chemical resistance to the resulting coated film for solvent-based system.

HEXAFOR® L-109 Water-based fluorinated polymer. It provides a durable and transparent surface treatment creating a protective layer against oil, water, coffee, ketchup, wine, etc. on outwears, footwears, gloves and accessories. The treated surfaces are easy to clean. It doesn’t require heating curing treatment.

HYDROSIN® C-20 Water-based and DMP-blocked crosslinking agent Formaldehyde-free* crosslinker to improve wash durability.. It can be used in the curing of polyurethane and acrylic dispersions, generally improving their chemical-physical resistance. This product provides a durable and transparent treatment to textile finishes. Used in combination with fluorocarbon auxiliaries, it provides soft-hand touch to treated fabrics and wash durability.

HYDROSIN® C-21 Waterbased aliphatic blocked polyisocyanate. It can be used in the curing of polyurethane and acrylic dispersion, generally improving their chemical-physical resistance. It offers an excellent crosslinking power to the resins used in textile printing. Suggested for anionic system. blocked crosslinkers are used to enhance glass coatings, giving the desired protection and aesthetic appearance. HYDROSIN® C-21 is a water-based crosslinker to formulate 1K glass coating formulations with improved impact and chemical resistance and excellent color retention. HYDROSIN® C-21 is a MEKO free high temperature unblocking crosslinker, which can be used in glass fiber sizing, offering improved strand integrity, reduced fuzz formation and compatibility to polyamide.

HYDROSIN® C-25 Poly-isocyanate crosslinking agent used in the curing of acrylic polymers and polyurethane dispersions for textile treatment, as well as in wood and metal finishing formulations. It enhances the performances of fluorocarbon finishes, requiring a soft curing temperature. This product provides high durability in water and oil repellence and it improves the stain release effect of the fluorocarbon auxiliaries. It maintains pure white color after heat treatment.

HYDROSIN® C-26 High molecular weight crosslinking agent, with an high content of reactive groups. Long pot life and compatibility with waterborne acrylic and polyurethane emulsions or resins. It improves abrasion resistance and hardness.

HYDROSIN® C-27 Solvent-based high molecular weight carbodiimide. It improves adhesion, other than abrasion and scratch resistance. High pot-life of the formulation, it improves chemical resistance against organic solvent and water and both aqueous and solvent based coatings.

HYDROSIN® NF-08 Water-based and MEKO-free, Formaldehyde-free, stabilized crosslinking agent. It improves the water- and oil- repellence effect of fluorocarbon textile products. It can be used in the curing of all polyurethane and acrylic dispersion to improve their chemical and physical resistance. It provides a durable and transparent treatment when applied on textile fibres. It does not change the original appearance of the treated materials.

HYDROSIN® NF-12 Fluorine-free polymeric multifunctional carbodiimide. It is a crosslinking agent for dispersions and emulsions of aqueous polymers containing carboxyl groups.

HYDROSIN® NF-12D Fluorine-free polymeric multifunctional carbodiimide. Crosslinking agent for dispersions and emulsions of aqueous polymers containing carboxyl groups. Anti-hydrolysis properties.

HYDROSIN® NF-15 Fluorine-free polymeric multifunctional carbodiimide. It is a crosslinking agent for room temperature curing. It can be added to dispersions of polyurethane and acrylic polymers to enhance their performances.

HYDROVEST™ 2000 is a fluorine free modified additive based on amphiphilic polymer especially designed toenhance biofouling release in marine coatings. HYDROVEST™ 2000 is blended into cross-linked matrix to form a controlled surface coating with efficent antifouling and fouling release properties.

LINEPLUS® PF 150-PH is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 177.1550 and Regulation (EU) 10/2011 and following amendments. In Grease & Lubricants work as thickening and viscosity adjusters in greases and oils production to improve wear and anti-stick performances as well as chemical and temperature resistance. Registered as Category Code H1, HX-1 or both to the NSF International/Non-food Compounds Registration Program. In Thermoplastcs & Elastomers improve a wide range of properties which include wear and abrasion resistance, anti-dripping, flame retardancy and simplifying the mould release. In Sealants, Technical Spray and Foams improve water repellence as well as chemical and temperature resistance of the formulation. Further, the PTFE particles act as a nucleating agent during the foaming process of PU and PP.

LINEPLUS® PF 251-RH is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 175.300 and Regulation (EU) 10/2011 and following amendments In Inks are added up to 5% in inks recipes to improve slip and rub resistance, reducing the CoF and keeping under control the surface smoothness and gloss. In Coatings provide outstanding wear, abrasion and corrosion resistance; moreover, they support the slip, acting surface modifiers (gloss or matt), that shows NPIRI averange values of 2,5. In Grease & Lubricants work as thickening and viscosity adjusters in greases and oils production to improve wear and anti-stick performances as well as chemical and temperature resistance.

LINEPLUS® PF 253-RH is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 175.300 and Regulation (EU) 10/2011 and following amendments. In Inks are added up to 5% in inks recipes to improve slip and rub resistance, reducing the CoF and keeping under control the surface smoothness and gloss. In Coatings provide outstanding wear, abrasion and corrosion resistance; moreover, they support the slip, acting surface modifiers (gloss or matt), that shows Hegman averange values of 7. In Grease & Lubricants work as thickening and viscosity adjusters in greases and oils production to improve wear and anti-stick performances as well as chemical and temperature resistance. In Thermoplastcs & Elastomers improve a wide range of properties which include wear and abrasion resistance, anti-dripping, flame retardancy and simplifying the mould release. Highest number of fuctional groups can be chemical coupled with PA.

LINEPLUS® PF 255-H is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 175.300 and Regulation (EU) 10/2011 and following amendments In Powder Coating reduce mar and abrasion resistance, working as texturing agents. In Grease & Lubricants work as thickening and viscosity adjusters in greases and oils production to improve wear and anti-stick performances as well as chemical and temperature resistance.

LINEPLUS® PF 260-H is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 175.300 and Regulation (EU) 10/2011 and following amendments In Coatings provide outstanding wear, abrasion and corrosion resistance; moreover, they support the slip, acting surface modifiers (gloss or matt). In Sealants & Technical Spray and Foams improve water repellence as well as chemical and temperature resistance of the formulation. Further, the PTFE particles act as a nucleating agent during the foaming process of PU and PP.

LINEPLUS® PF 265-RBH is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 175.300 and Regulation (EU) 10/2011 and following amendments. In Inks are added up to 5% in inks recipes to improve slip and rub resistance, reducing the CoF and keeping under control the surface smoothness and gloss. In Coatings provide outstanding wear, abrasion and corrosion resistance; moreover, they support the slip, acting surface modifiers (gloss or matt), that shows Hegman averange values of 7. In Grease & Lubricants work as thickening and viscosity adjusters in greases and oils production to improve wear and anti-stick performances as well as chemical and temperature resistance. In Thermoplastcs & Elastomers improve a wide range of properties which include wear and abrasion resistance, anti-dripping, flame retardancy and simplifying the mould release.

LINEPLUS® PF 267-H is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 175.300 and Regulation (EU) 10/2011 and following amendments In Coatings provide outstanding wear, abrasion and corrosion resistance; moreover, they support the slip, acting surface modifiers (gloss or matt). In Sealants & Technical Spray and Foams improve water repellence as well as chemical and temperature resistance of the formulation. Further, the PTFE particles act as a nucleating agent during the foaming process of PU and PP.

LINEPLUS® PF 3004 is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 175.300 and Regulation (EU) 10/2011 and following amendments. In Powder Coating reduce mar and abrasion resistance, working as texturing agents.

LINEPLUS® PF 631-f is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 177.1550 and Regulation (EU) 10/2011 and following amendments. In Powder Coating reduce mar and abrasion resistance, working as texturing agents.

LINEPLUS® PF 633-F is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 177.1550 and Regulation (EU) 10/2011 and following amendments. In Powder Coating reduce mar and abrasion resistance, working as texturing agents.

RHEOSIN® PN201 Newtonian behaviour, high shear polyurethane thickener. It improves levelling, brush drag and reduces spattering during roller application. It associates with binders and pigments.

RHEOSIN® PN203 Associative polyurethane thickener with Newtonian behaviour, twice as efficient than standard products. It reduces roller-spattering during application, improves brush drag with an excellent gloss retention

RHEOSIN® PP202 Associative thickener for aqueous system, polyurethane pseudoplastic for both industrial and decorative coating. It improves sag resistance and anti-settling; mainly used as single thickener for spray application.

RHEOSIN® PP205 Associative thickener based on polyurethane chemistry with pseudoplastic behaviour. It is suitable for industrial coating to improve flow and levelling. It could provide application behaviour and brash drag.

RHEOSIN® PT204 Ready to use, additive for aqueous and high polar non-aqueous coatings. Liquid urea based, it provides thixotropic flow, with low system dependency. Excellent anti-settling and stabilization of pigments and fillers. It reduces spray pattern and orange peel on the finish coatings.

is a water dispersion of PTFE-based threads sealant, which increases the tightness of the threaded parts and prevents leakage of gases. TENFIL can be used at temperatures from -45°C to +150°C (-49°F to +302°F). The product is intended for the assembly of fittings and threaded joints of different kinds of pipes. TENFIL is approved UL (UNDERWRITERS LABORATORIES INC.) - FILE MH28596 (UL1356)