PRODUCT OVERVIEW
HEXAFOR® surfactants are highly efficient surface-active agents based on short perfluorinated chains. They are especially designed to provide rapid spreading, wetting and levelling properties to a wide range of water and solvent borne systems, such as detergents, paints, varnishes, inks, waxes, floor polishes, adhesives, batteries.
PROPERTIES
- SURFACE TENSION REDUCTION
- AVOID THE FORMATION OF SURFACE DEFECTS
- WETTING
- DIRT PICK-UP RESISTANCE
- EMULSIFYING
- OPEN TIME IMPROVEMENT
- SPREADING
- ANTI-BLOCKING
- FOAMING CONTROL
- LOW FOAM FORMATION
- LEVELLING
- ANTIFOGGING
- ANTICORROSION
FLUOROSURFACTANTS
Product | Chemical description | Description |
---|---|---|
HEXAFOR® 601 | Phosphate esters | HEXAFOR® 601 Anti-blocking agent, oil repellence properties, dirty pick-up resistance, wetting and levelling agent.
|
HEXAFOR® 631 | Polymeric ethoxylate | HEXAFOR® 631 Reduces surface energy of water-based floor finishes, waxes and polishes. Low foam formation.
|
HEXAFOR® 632 | Polymeric ethoxylate | HEXAFOR® 632 Reduces surface tension at very low concentration, stable in acidic and alkaline medium. Used in anti-fogging formulations.
|
HEXAFOR® 633 | Polymeric ethoxylate | HEXAFOR® 633 Flow and levelling agent in paints, adhesives, caulks, architectural coatings, inks.
|
HEXAFOR® 635 | Polymeric ethoxylate | HEXAFOR® 635 Reduces surface energy of water-based floor finishes, waxes and polishes.
|
HEXAFOR® 636 | Polymeric acrylic | HEXAFOR® 636 For baking enamels based on alkyd, acrylic or polyester resins. Very soluble in hydroxyl resins for 2K coating. Air-drying alkyd systems.
|
HEXAFOR® 641 | Sulfonic acid/Lithium salt | HEXAFOR® 641 Reduces surface energy at very low concentrations. In wood coatings, it helps the varnish to overcome surface contamination defects at very low concentration (0,02%).
|
HEXAFOR® 642 | Modified Polyether | HEXAFOR® 642 Solvent-free wetting and dispersing additive. Aqueous coatingsystems. Printing inks and liquid colour masterbatches. Stable aqueous effect of pigment dispersions.
|
HEXAFOR® 644-D | Polymeric acrylic | HEXAFOR® 644-D Flow and levelling agent in paints, adhesives, caulks, architectural coatings and inks.
|
HEXAFOR® 672 | Polymeric ethoxylate | HEXAFOR® 672 Wetting and dispersing additive with low to moderate foam formation.
|
HEXAFOR® 675 | Polymeric ethoxylate | HEXAFOR® 675 Improves wetting, enhances levelling, reduces cratering. Compatible with most aqueous-based waxes and polishes.
|
HEXAFOR® 676 | Polymeric ethoxylate | HEXAFOR® 676 Cleaners for glass and hard surfaces. It is "ultimately biodegradable" as defined by annex III of the European Regulation 648/2004/EC on detergents.
|
HEXAFOR® 678 | Polymeric ethoxylate | HEXAFOR® 678 It is stable in acidic, basic, and in water with high hardness. Excellent wetting and levelling agent.
|
HEXAFOR® 678-W | Polymeric ethoxylate | HEXAFOR® 678-W Reduces surface energy of water-based floor finishes, waxes and polishes.
|
HEXAFOR® 685 | Polymeric acrylic | HEXAFOR® 685 Reduces surface tension. Improves wetting and levelling. Reduces cratering, fish-eyes effect and orange-peel effect. At the right dosage it is used as foam stabilizer.
|
HEXAFOR® 692 | Polymeric acrylic | HEXAFOR® 692 Provides both surface water and oil repellence and chemical resistance to the resulting coated film.
|
HEXAFOR® 695 | Modified polyurethane | HEXAFOR® 695 Improves cleanability of oily agents and provides oil repellence to flat architectural paints and waterborne coatings. Provides good dirt pick up resistance (DPR) in exterior latex paints.
|