Stone treatment

HEXAFOR® 6173 Water fluoropolymer emulsion designed for application on porous surfaces as terracotta, grout and concrete. If properly formulated it could impart excellent water and oil repellence as well as dirt pick up resistance to these substrates. It could be used as an ingredient in a wide variety of industrially-applied formulations.

HEXAFOR® 6211 Excellent water and oil repellent for natural stone, especially for porous stone. If mixed with a cationic/non-ionic high gloss water based acrylic polymer it could impart a wet look effect to the treated stone. Low minimum film forming temperature (MFFT

HEXAFOR® 6232 Excellent water and oil repellent for natural stone, especially for porous stone. In some cases, it could provide a weak wet look effect. It can be formulated inside paints, varnishes and waxes to increase water and oil repellence. It can be added in wood protective formulations.

HEXAFOR® 6242 Excellent water and oil repellent for natural stone, especially for porous stone. If applied in more coats, it can give weak wet look effect. The dilution in different amount of water/isopropanol could increase the penetration of the product into the treated stone.

HEXAFOR® 6280 Excellent water and oil repellent for natural stone, especially for compact stone. It provides a durable and transparent treatment to various fabrics and leathermade materials like outerwear, footwear, gloves and accessories. The result is an optimal protecting barrier against olive oil, water, coffee, ketchup and wine. HEXAFOR® 6280 does not modify the original appearance of the treated materials.

HEXAFOR® 6282 Excellent water and oil repellent with a high Flash Point (>70°C) and low odour for natural stone, especially for compact stone. It decreases the evaporation rate of the applied formulation, increasing the penetration into the stone. It provides a durable and transparent treatment to various fabrics and leather-made materials like outerwear, footwear, gloves and accessories. The result is an optimal protecting barrier against olive oil, water, coffee, ketchup and wine. HEXAFOR® 6282 does not modify the original appearance of the treated materials.

HEXAFOR® 6392 Excellent water and oil repellent with very good beading effect for natural stone, especially for porous stone like limestone and sandstone. To give a wet look effect to the treated stone, you should mix with a cationic/non-ionic high gloss water based acrylic polymer. The adhesion of the dried coating is increased by the presence of a silane monomers in the polymeric structure.

HEXAFOR® 6400 Excellent water and oil repellent with very good anti-stain effect for natural stone, especially for compact stone. Low odour. Compatible with anionic systems. Improves the UV resistance of the polymers used for coating applications.

HEXAFOR® 6600 Excellent water and oil repellent with very good anti-stain effect for natural stone like limestone and sandstone. It is compatible with anionic systems. It improves the UV resistance of the polymers used for coating applications. The treated surfaces are easily cleanable. It does not change the original appearance of the stone.

HEXAFOR® 695 Improves cleanability of oily agents and provides oil repellence to flat architectural paints, Inks and waterborne coatings Provides good dirt pick up resistance (DPR) in exterior latex paints.

HEXAFOR® AGR-60 Considered as a sacrificial anti-graffiti, it could protect masonry such as concrete, brickwork and limestone from spray paint and marker pen. Those are easily removed by using common removers or steam. Strongly resistant to UV light, it prevents yellowing and it will not crack or peel off from the treated surface.