Coatings

  • Tutto
  • Can & coil coatings
  • Coating
  • General industrial coatings
  • Glass coatings & antifog
  • Marine & protective coatings
  • Powder coatings
  • Wood coatings

HEXAFOR® 601

tensioattivi
Phosphate esters
HEXAFOR® 601 Anti-blocking agent, oil repellence properties, dirty pick-up resistance, wetting and levelling agent.

HEXAFOR® 631

tensioattivi
Polymeric ethoxylate
HEXAFOR® 631 Reduces surface energy of water-based floor finishes, waxes and polishes, inks, adhesives and sealants. Low foam formation.

HEXAFOR® 632

tensioattivi
Polymeric ethoxylate
HEXAFOR® 632 Reduces surface tension at very low concentration, stable in acidic and alkaline medium. Used in anti-fogging formulations

HEXAFOR® 635

tensioattivi
Polymeric ethoxylate
HEXAFOR® 635 Reduces surface energy of water-based floor finishes, waxes and polishes.

HEXAFOR® 636

tensioattivi
Polymeric acrylic
HEXAFOR® 636 For baking enamels based on alkyd, acrylic or polyester resins. Very soluble in hydroxyl resins for 2K coating. Air-drying alkyd systems.

HEXAFOR® 641

tensioattivi
Sulfonic acid/Lithium salt
HEXAFOR® 641 Reduces surface energy at very low concentrations. In wood coatings, it helps the varnish to overcome surface contamination defects at very low concentration (0,02%).

HEXAFOR® 642

tensioattivi
Modified Polyether
HEXAFOR® 642 Solvent-free wetting and dispersing additive. Aqueous coating systems. Printing inks and liquid colour masterbatches. Stable aqueous effect of pigment dispersions.

HEXAFOR® 644-D

tensioattivi
Polymeric acrylic
HEXAFOR® 644-D Flow and levelling agent in paints, adhesives, caulks, architectural coatings and inks.

HEXAFOR® 672

tensioattivi
Polymeric ethoxylate
HEXAFOR® 672 Wetting and dispersing additive with low to moderate foam formation.

HEXAFOR® 675

tensioattivi
Polymeric ethoxylate
HEXAFOR® 675 Improves wetting, enhances levelling, reduces cratering. Compatible with most aqueous-based waxes and polishes.

HEXAFOR® 676

tensioattivi
Polymeric ethoxylate
HEXAFOR® 676 Cleaners for glass and hard surfaces. It is "ultimately biodegradable" as defined by annex III of the European Regulation 648/2004/EC on detergents.

HEXAFOR® 678

tensioattivi
Polymeric ethoxylate
HEXAFOR® 678 It is stable in acidic, basic, and in water with high hardness. Excellent wetting and levelling agent.

HEXAFOR® 678-W

tensioattivi
Polymeric ethoxylate
HEXAFOR® 678-W is a water-based, non-ionic fluorosurfactant that effectively reduces surface tension at very low concentrations, has high property in terms of dynamic surface tension, allowing the coating formulations to reach rapidly the low values of static surface tensions. It is stable in both acidic and basic conditions, making it perfect for paint and coatings.

HEXAFOR® 685

tensioattivi
Polymeric acrylic
HEXAFOR® 685 is a polymeric fluorinated additive for solvent-based systems. Reduces surface tension. Improves wetting and levelling. Reduces cratering, fish-eyes effect and orange-peel effect. At the right dosage it is used as foam stabilizer. Hexafor 685 has been designed to have the right chemical-physical characteristics allowing a foam stabilization and allowing the various agents to facilitate the production of small gas bubbles in emulsion explosive compositions.

HEXAFOR® 692

tensioattivi
Polymeric acrylic
HEXAFOR® 692 Provides both surface water and oil repellence and chemical resistance to the resulting coated film for solvent-based system.

HEXAFOR® L-109

leather
Polyurethane in water
HEXAFOR® L-109 Water-based fluorinated polymer. It provides a durable and transparent surface treatment creating a protective layer against oil, water, coffee, ketchup, wine, etc. on outwears, footwears, gloves and accessories. The treated surfaces are easy to clean. It doesn’t require heating curing treatment.

HYDROSIN® C-21

crosslinking
Blocked isocyanate in water
HYDROSIN® C-21 Waterbased aliphatic blocked polyisocyanate. It can be used in the curing of polyurethane and acrylic dispersion, generally improving their chemical-physical resistance. It offers an excellent crosslinking power to the resins used in textile printing. Suggested for anionic system. blocked crosslinkers are used to enhance glass coatings, giving the desired protection and aesthetic appearance. HYDROSIN® C-21 is a water-based crosslinker to formulate 1K glass coating formulations with improved impact and chemical resistance and excellent color retention. HYDROSIN® C-21 is a MEKO free high temperature unblocking crosslinker, which can be used in glass fiber sizing, offering improved strand integrity, reduced fuzz formation and compatibility to polyamide.

HYDROSIN® C-25

crosslinking
Poly-isocyanate
HYDROSIN® C-25 Poly-isocyanate crosslinking agent used in the curing of acrylic polymers and polyurethane dispersions for textile treatment, as well as in wood and metal finishing formulations. It enhances the performances of fluorocarbon finishes, requiring a soft curing temperature. This product provides high durability in water and oil repellence and it improves the stain release effect of the fluorocarbon auxiliaries. It maintains pure white color after heat treatment.

HYDROSIN® C-26

crosslinking
Poly-carbodiimide
HYDROSIN® C-26 High molecular weight crosslinking agent, with an high content of reactive groups. Long pot life and compatibility with waterborne acrylic and polyurethane emulsions or resins. It improves abrasion resistance and hardness.

HYDROSIN® C-27

crosslinking
Solvent-based poly-carbodiimide
HYDROSIN® C-27 Solvent-based high molecular weight carbodiimide. It improves adhesion, other than abrasion and scratch resistance. High pot-life of the formulation, it improves chemical resistance against organic solvent and water and both aqueous and solvent based coatings.

HYDROSIN® NF-12

crosslinking
Poly-carbodiimide
HYDROSIN® NF-12 Fluorine-free polymeric multifunctional carbodiimide. It is a crosslinking agent for dispersions and emulsions of aqueous polymers containing carboxyl groups.

HYDROSIN® NF-12D

crosslinking
Poly-carbodiimide
HYDROSIN® NF-12D Fluorine-free polymeric multifunctional carbodiimide. Crosslinking agent for dispersions and emulsions of aqueous polymers containing carboxyl groups. Anti-hydrolysis properties.

HYDROSIN® NF-15

crosslinking
Poly-carbodiimide
HYDROSIN® NF-15 Fluorine-free polymeric multifunctional carbodiimide. It is a crosslinking agent for room temperature curing. It can be added to dispersions of polyurethane and acrylic polymers to enhance their performances.

HYDROVEST™ 2000

tensioattivi
Non-toxic agent for marine antifouling paint
HYDROVEST™ 2000 is a fluorine free modified additive based on amphiphilic polymer especially designed toenhance biofouling release in marine coatings. HYDROVEST™ 2000 is blended into cross-linked matrix to form a controlled surface coating with efficent antifouling and fouling release properties.

LINEPLUS® PF 150-PH

ptfe
PTFE Micro-Powder
LINEPLUS® PF 150-PH is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 177.1550 and Regulation (EU) 10/2011 and following amendments. In Grease & Lubricants work as thickening and viscosity adjusters in greases and oils production to improve wear and anti-stick performances as well as chemical and temperature resistance. Registered as Category Code H1, HX-1 or both to the NSF International/Non-food Compounds Registration Program. In Thermoplastcs & Elastomers improve a wide range of properties which include wear and abrasion resistance, anti-dripping, flame retardancy and simplifying the mould release. In Sealants, Technical Spray and Foams improve water repellence as well as chemical and temperature resistance of the formulation. Further, the PTFE particles act as a nucleating agent during the foaming process of PU and PP.

LINEPLUS® PF 251-RH

ptfe
PTFE Micro-Powder
LINEPLUS® PF 251-RH is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 175.300 and Regulation (EU) 10/2011 and following amendments In Inks are added up to 5% in inks recipes to improve slip and rub resistance, reducing the CoF and keeping under control the surface smoothness and gloss. In Coatings provide outstanding wear, abrasion and corrosion resistance; moreover, they support the slip, acting surface modifiers (gloss or matt), that shows NPIRI averange values of 2,5. In Grease & Lubricants work as thickening and viscosity adjusters in greases and oils production to improve wear and anti-stick performances as well as chemical and temperature resistance.

LINEPLUS® PF 253-RH

ptfe
PTFE Micro-Powder
LINEPLUS® PF 253-RH is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 175.300 and Regulation (EU) 10/2011 and following amendments. In Inks are added up to 5% in inks recipes to improve slip and rub resistance, reducing the CoF and keeping under control the surface smoothness and gloss. In Coatings provide outstanding wear, abrasion and corrosion resistance; moreover, they support the slip, acting surface modifiers (gloss or matt), that shows Hegman averange values of 7. In Grease & Lubricants work as thickening and viscosity adjusters in greases and oils production to improve wear and anti-stick performances as well as chemical and temperature resistance. In Thermoplastcs & Elastomers improve a wide range of properties which include wear and abrasion resistance, anti-dripping, flame retardancy and simplifying the mould release. Highest number of fuctional groups can be chemical coupled with PA.

LINEPLUS® PF 255-H

ptfe
PTFE Micro-Powder
LINEPLUS® PF 255-H is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 175.300 and Regulation (EU) 10/2011 and following amendments In Powder Coating reduce mar and abrasion resistance, working as texturing agents. In Grease & Lubricants work as thickening and viscosity adjusters in greases and oils production to improve wear and anti-stick performances as well as chemical and temperature resistance.

LINEPLUS® PF 260-H

ptfe
PTFE Micro-Powder
LINEPLUS® PF 260-H is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 175.300 and Regulation (EU) 10/2011 and following amendments In Coatings provide outstanding wear, abrasion and corrosion resistance; moreover, they support the slip, acting surface modifiers (gloss or matt). In Sealants & Technical Spray and Foams improve water repellence as well as chemical and temperature resistance of the formulation. Further, the PTFE particles act as a nucleating agent during the foaming process of PU and PP.

LINEPLUS® PF 265-RBH

ptfe
PTFE Micro-Powder
LINEPLUS® PF 265-RBH is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 175.300 and Regulation (EU) 10/2011 and following amendments. In Inks are added up to 5% in inks recipes to improve slip and rub resistance, reducing the CoF and keeping under control the surface smoothness and gloss. In Coatings provide outstanding wear, abrasion and corrosion resistance; moreover, they support the slip, acting surface modifiers (gloss or matt), that shows Hegman averange values of 7. In Grease & Lubricants work as thickening and viscosity adjusters in greases and oils production to improve wear and anti-stick performances as well as chemical and temperature resistance. In Thermoplastcs & Elastomers improve a wide range of properties which include wear and abrasion resistance, anti-dripping, flame retardancy and simplifying the mould release.

LINEPLUS® PF 267-H

ptfe
PTFE Micro-Powder
LINEPLUS® PF 267-H is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 175.300 and Regulation (EU) 10/2011 and following amendments In Coatings provide outstanding wear, abrasion and corrosion resistance; moreover, they support the slip, acting surface modifiers (gloss or matt). In Sealants & Technical Spray and Foams improve water repellence as well as chemical and temperature resistance of the formulation. Further, the PTFE particles act as a nucleating agent during the foaming process of PU and PP.

LINEPLUS® PF 3004-H

ptfe
PTFE Micro-Powder
LINEPLUS® PF 3004 is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 175.300 and Regulation (EU) 10/2011 and following amendments. In Powder Coating reduce mar and abrasion resistance, working as texturing agents.

LINEPLUS® PF 631-F

ptfe
PTFE Micro-Powder
LINEPLUS® PF 631-f is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 177.1550 and Regulation (EU) 10/2011 and following amendments. In Powder Coating reduce mar and abrasion resistance, working as texturing agents.

LINEPLUS®® PF 633-F

ptfe
PTFE Micro-Powder
LINEPLUS® PF 633-F is a micronized PTFE additive, which is PFOA free, designed to enhance the wear resistance and lubricity of a variety of materials. Compliant with FDA 21 CFR 177.1550 and Regulation (EU) 10/2011 and following amendments. In Powder Coating reduce mar and abrasion resistance, working as texturing agents.

RHEOSIN® PN201

rheological
Rheology modifer additive
RHEOSIN® PN201 Newtonian behaviour, high shear polyurethane thickener. It improves levelling, brush drag and reduces spattering during roller application. It associates with binders and pigments.

RHEOSIN® PN203

rheological
Rheology modifer additive
RHEOSIN® PN203 Associative polyurethane thickener with Newtonian behaviour, twice as efficient than standard products. It reduces roller-spattering during application, improves brush drag with an excellent gloss retention

RHEOSIN® PP202

rheological
Rheology modifer additive
RHEOSIN® PP202 Associative thickener for aqueous system, polyurethane pseudoplastic for both industrial and decorative coating. It improves sag resistance and anti-settling; mainly used as single thickener for spray application.

RHEOSIN® PP205

rheological
Rheology modifer additive
RHEOSIN® PP205 Associative thickener based on polyurethane chemistry with pseudoplastic behaviour. It is suitable for industrial coating to improve flow and levelling. It could provide application behaviour and brash drag.

RHEOSIN® PT204

rheological
Rheology modifer additive
RHEOSIN® PT204 Ready to use, additive for aqueous and high polar non-aqueous coatings. Liquid urea based, it provides thixotropic flow, with low system dependency. Excellent anti-settling and stabilization of pigments and fillers. It reduces spray pattern and orange peel on the finish coatings.