Fluoro Surfactants

Product overview:
HEXAFOR surfactants are highly effective and efficient fluorinated surface active agents based on short perfluorinated chains. They are especially designed to provide rapid spreading, wetting and leveling performances to a broad range of water and solvent Bornee systems such as detergents, paints and varnishes, inks, waxes and floor polishes, adhesives, battery and variety of specialty applications. The use of HEXAFOR surfactants allows to develop formulations to improve several properties.

    Properties:
  • Reduce Surface tension
  • Wetting
  • Emulsifying
  • Spreading
  • Foaming control
  • Levelling
  • Antifogging
  • Anticorrosion
  • Help paint and coating overcome surface contamination
  • Dirt Pick up resistent
  • Open time improvement
  • Anti Blocking
  • Low foam




Download catalogue
Products
Ionogenity
Chemical Description
Solvent
Active substance
Recomended for
Surface tension 0,1%
[DYNES/CM]

Applications
Benefits
HEXAFOR 601 tds it tds en
Anionic
Phosphate esters
Water
15%
Water Borne
16,9
Architectural coatings, Floor finishes, Waxes, Polishes
Anti-blocking agent, oil repellence properties, dirty pick up resistance, wetting and levelling agent.
HEXAFOR 631 tds it tds en
Non ionic
Polymeric Ethoxylated
Water
25%
Water Borne
17,9
Inks, Paints, Adhesives, Polish, Battery
Reduces surface energy of water-based floor finishes, waxes and polishes. Zinc battery scale inhibitor. Low foam formation.
HEXAFOR 633 tds it tds en
Non ionic
Polymeric Ethoxylated
Water
100%
Water Borne
24,8
Polish, Paint, Wood coating
Flow and levelling agent in paints, adhesives, caulks, architectural coatings, inks. Zinc battery scale inhibitor.
HEXAFOR 635 tds it tds en
Non ionic
Polymeric Ethoxylated
Water
25%
Water Borne
17,9
Inks, Paints, Adhesives, Polish, Battery
Reduces surface energy of water-based floor finishes, waxes and polishes. Metal and Electronic.
HEXAFOR 636 tds it tds en
-
Polymeric acrylic
-
100%
Solvent Borne
-
Slip and leveling agent. Car refinish paint.
For baking enamels based on alkyd, acrylic or polyester resins. Very soluble in hydroxyl resins for 2K coating. Air-drying alkyd systems.
HEXAFOR 641 tds it tds en
Anionic
Sulfonic acid/Lithium Salt
IPA/Water
25%
Water Borne
15,2
Polish, Paint, Wood coating
Reduces surface energy at very low concentrations. In wood coatings, it helps the varnish to overcome surface contamination defects at very low concentration (0,02%).
HEXAFOR 642 tds it tds en
Anionic
Polymeric acrylic
-
100%
Water Borne, Solvent Borne, Solvent Free
20,3
Inks, Paints, Adhesives
Solvent-free wetting and dispersing additive. Aqueous coating systems. Printing inks and liquid colour masterbatches. Stable aqueous effect of pigment dispersions.
HEXAFOR 644-D tds it tds en
Non ionic
Polymeric acrylic
DPM
25%
Water Borne, Solvent Borne
20,5
Adhesives, Inks, Batteries
Flow and levelling agent in paints, adhesives, caulks, architectural coatings and inks.
HEXAFOR 672 tds it tds en
Non ionic
Polymeric Ethoxylated
DPM
10%
Water Borne
18,2
Cleaners, Paint
Solvent-borne wetting and dispersing additive with low to moderate foam formation.
HEXAFOR 675 tds it tds en
Non ionic
Polymeric Ethoxylated
Water/Ethylene Glycol
50%
Water Borne
18
Paints, Coil Coating
Improves wetting, enhances levelling, reduces cratering. Compatible with most aqueous-based waxes and polishes.
HEXAFOR 676 tds it tds en
Non ionic
Polymeric Ethoxylated
Water
65%
Water Borne, Solvent Free
18,7
Cleaners
Cleaners for glass and hard surfaces. It is “ultimately biodegradable” as defined by annex III of the European Regulation 648/2004/EC on detergents.
HEXAFOR 678 tds it tds en
Non ionic
Polymeric Ethoxylated
-
100%
Water Borne, Solvent Borne, Solvent Free
17,6
Inks, Paints, Adhesives, Polish
It is stable in acidic, basic, and in water with high hardness.
HEXAFOR 678-W tds it tds en
Non ionic
Polymeric Ethoxylated
Water
25%
Water Borne, Solvent Free
17,6
Inks, Coil Coating, Polish
Reduces surface energy of water-based floor finishes, waxes and polishes.
HEXAFOR 685 tds it tds en
-
Polymeric acrylic
Distillated
(petroleum)
25%
Solvet Born
-
Foam stabilizer
Reduces surface tension. Improves wetting and levelling. Reduces cratering, fish-eyes effect and orangepeel effect. At the right dosage it is used as foam stabilizer.
HEXAFOR 692 tds it tds en
-
Polymeric acrylic
Butyl acetate
25%
Solvet Born
-
Paints
Provides both surface water and oil repellence and chemical resistance to the resulting coated film.
HEXAFOR 695 tds it tds en
Cationic
Modified Polyurethane
Water/DMM
30%
Water Borne
-
Wood Coating, Paints, Inks
Improves cleanability of oily dirt and provides oil repellence to flat architectural paints and waterborne coatings. Provides good dirt pick up resistance (DPR) for exterior latex paints.

NOTE! This site uses cookies and similar technologies.

If you not change browser settings, you agree to it. Learn more

I understand
CUSTOMER PRIVACY POLICY Pursuant to Legislative Decree no. 196/2003, and EU Regulation No. 679/2016 (GDPR), and with respect to your personal information subject to processing, we take this opportunity to provide you the following information. DATA-PROCESSING PURPOSES Maflon S.p.A., a company with registered office on Viale Bianca Maria No. 41 – 20122 Milano, Tax ID and VAT No. 04080020169, appearing herein as Data Controller, shall process client data for the following purposes: a) Vetting (financial solvency of current and prospective customers, potential reputational impact of the relationship, anti-corruption and anti-money-laundering compliance); b) Customer contract execution, management, and performance; c) Statutory/regulatory compliance relating to civil, tax, and accounting laws and regulations; discharging duties assumed under contract; technical assistance and support regarding purchased products and services, including post-sale; accounts receivable; d) Marketing and references, information on future sales initiatives, service and/or product innovations, special offers, market research, statistics. LEGAL BASIS FOR THE DATA PROCESSING Customer personal data shall be processed based on express consent provided by signing the instant policy. Please note that, even where consent is not provided, or where it is revoked, your personal data may still be processed in the following situations, and when predicated on the following legal bases: a) Processing is necessary to perform under a contract to which you are privy, or for the carrying out of any pre-contractual measures implemented at your request; b) Processing is necessary to discharge a legal duty incumbent on the Data Controller; c) Processing is necessary to safeguard the interests of a natural person; d) Processing is necessary to perform a duty in the public interest, or relating to the exercise of any public authority vested in Data Controller; e) Processing is necessary for Data Controller to pursue a legitimate interest; legitimate interests shall include: - The interest in executing, managing, and performing those contracts identified in subsection 1(b) hereof; - The interest to protect any rights arising - be it directly or indirectly - from the aforementioned contracts; - The interest in safeguarding company security and equity; Provided no interest, right, or fundamental liberty on the part of Data Subject, and requiring the protection of any personal data, trumps the same. DATA SUBMISSION Subject to Data Subject’s autonomy, the submission of any directly acquired personal data may be: a) Mandatory under applicable law, regulation, or EU statute, or any order issued by any authority mandated by statute, or by any supervisory or control body; b) Strictly necessary to execute a new undertaking with the customer and ... or to manage and perform under any existing undertaking or obligation. Any objection to processing and/or refusal on the part of Data Subject to submit personal data may make any new contracts, performance under existing contracts, compliance with EU law, regulation, or statute, or the orders of any authority mandated by statute or by any supervisory or control body, impracticable or impossible, either in whole or in part. DATA PROCESSING METHODS The processing of personal data may be performed with the aid of analogue, electronic, or otherwise automated instruments, with methods and procedures strictly related to the pursuit of the foregoing purposes. Maflon S.p.A. carry out processing directly through parties within its own organisation, or in outsourcing. Such parties shall process data: a) Pursuant to instructions provided by Data Controller, as either authorised persons or processors, and solely in the pursuit of specific purposes as stated herein. b) Autonomously, as independent data controllers. DATA DISCLOSURE AND DISSEMINATION Personal data - solely for the purposes appearing in point 1 - may be disclosed to: a) Data Controller employees or associates duly authorised by the same to process data; b) Credit institutions, service companies for the recording, packaging, transport, and handling of documents, subcontractors tasked with projects or construction, service providers, notaries, attorneys, experts, consultants, collections companies, auditing firms; c) Entities to whom disclosure is required in compliance with any collective-bargaining agreement (e.g. a labour union) or specific regulatory duties (e.g. police force or other public authority). The data shall not be disseminated. DATA SUBJECT RIGHTS Data-protection regulations (see Art. 12-22 of EU Regulation no. 679/2016) guarantee the right to be advised of data processing, the right to access the data themselves at any time, and to request such data be updated, supplemented, or corrected. Where the criteria established by the law are met, the Data Subject may also exercise the right to have the data deleted, limit their processing, object to processing, to avoid being subject to decisions based solely on automated processing, and the right to data portability. Should personal-data processing be predicated on Data Subject consent, the Data Subject shall have the right to revoke such consent. To exercise your rights - and for more detailed information regarding the parties or categories of parties to whom data might be disclosed, or who might have access to the same as data processors or authorised persons - please contact the Data Protection Officer at Maflon S.p.A., with registered office on Viale Bianca Maria No. 41 – 20122 Milano, via email at privacy@maflon.com. Should you believe your rights have been infringed upon, you may protect your rights by lodging a complaint with the Data Protection Authority. DATA RETENTION PERIOD Personal data shall be retained for so long as is necessary to realise the purposes appearing in point 1 herein; following the achievement of such objectives, the data may be retained until the rights accruing to you and to Data Controller from the legal relationship have lapsed with respect to any facts directly or indirectly related to the purposes themselves (10 years). PROCESSING OF THIRD-PARTY DATA The customer is on notice that should any third party (e.g. representative, employee, associate) be involved in the performance of any contract executed with Data Controller, such third party’s data may be processed by Maflon S.p.A. likewise acting as Data Controller, for the purposes appearing in point 1 herein, and especially with respect to managing communication with such customer contact persons and delegates. Such processing shall have the same goals, methods, and retention period as the data otherwise described in the instant policy; furthermore, with respect to such processing, data subjects shall have the same rights identified in point 6 herein. Customer agrees to properly advise any data subjects engaged by the same with respect to such processing, including but not limited to by providing the instant policy to them, and by recording their signature in acknowledgement whereof.